TB-1P TILT BASE
The DX Engineering
TB-1P Tilt Base mounting plate enables operators to raise
or lower Hustler BTV, Cushcraft and Butternut vertical antennas
in seconds while leaving the base securely attached to the
mounting post. The one-man tilt design dramatically reduces
the effort it takes to adjust your antenna˜just loosen the
flange nuts, lift and tilt. The Tilt Base also eliminates
the need to need to climb ladders or fumble with brackets.
Constructed with quarter-inch 6061-T651 aluminum alloy, the
TB-1P mounting plate resists corrosion and complements the
DX Engineering RADP-1P radial plate (shown in photo). Price:
$39.95. Contact Information: DX Engineering, P.O. Box 1491,
Akron, OH 44309. web www.dxengineering.com;
phone: 800/777-0703, fax: 330/572-3279
|
